Mark NSS

PLEASE FOLLOW THE BELOW INSTRUCTIONS TO CONFIGURE YOUR MARK NSS GEARBOX

TO SELECT AN EXACT DUPLICATE GEARBOX

  • Select the unit size using the MARK NSS CONFIGURATOR
  • In the “Downloads” tab, click on “generate data sheet”
  • Refer to the last page of the pdf data sheet, and include the following information:
    • Contact information
    • Operating horsepower
    • Input RPM
    • Service factor required
    • Horsburgh & Scott Serial Number of Duplicate Drive in an email
    • to inquiry@horsburghscott.com
    • Please mention if installation and/or any spare parts (per the last page of the data sheet are required)

TO SELECT A NEW GEARBOX

  • Refer to the “Ratings” tab and select a unit based on Mechanical Rating capacity. Please note that the all mechanical ratings presented in the catalog are at a service factor of 1.0. For increased service factor requirements, select a bigger unit which has a mechanical rating = Service Factor*Operating Horsepower (HP)
  • Refer to the thermal ratings of the unit and make sure the thermal capacity (rating) exceeds the operating HP. Three options are available: Zero (0), One (1) and Two (2) fans with increasing thermal capacity. If the operating HP is bigger than all of these, select a bigger unit which is thermally capable
  • Once the unit has been selected based on ratings, use the Configurator to select and view the 3D model of the shortlisted gearbox
  • In the “Downloads” tab of the configurator, the 3D CAD model of the gearbox can be downloaded in the desired format.
  • To get an instant quote, click on “Generate Datasheet”, which will prompt a ZIP file download with your quote and technical data of the unit
  • TO PLACE YOUR ORDER, ATTACH THIS QUOTE DATA SHEET AND YOUR PURCHASE ORDER IN AN EMAIL TO INQUIRY@HORSBURGH- SCOTT.COM ALONG WITH YOUR CONTACT INFORMATION MENTIONED ON THE LAST PAGE OF THE DATA SHEET.

  • For a gearbox with add on options, follow the above procedure for the data sheet. Then, refer to add on options offered on the last page of the above data sheet. Supply this information, attach the data sheet and include the following information
    • Contact information
    • Operating horsepower
    • Input RPM
    • Service factor required, IN AN EMAIL TO HORSBURGH-SCOTT.COM
    • Please mention if installation and/or any spare parts (per the last page of the datasheet are required)

ENGINEERING, MANUFACTURING & MAINTAINING GEARS WORLDWIDE

Read our Success Stories